Good Season Environmental

Frequently Asked Questions

Please reach us at if you cannot find an answer to your question.

What is asbestos?

“Asbestos” is the name given to a group of minerals that occur naturally as bundles of fibers which can be separated into thin threads. These fibers are not affected by heat or chemicals and do not conduct electricity. For these reasons, asbestos has been widely used in many industries. Four types of asbestos have been used commercially:

Chrysotile, or white asbestos
Crocidolite, or blue asbestos
Amosite, which usually has brown fibers
Anthophyllite, which usually has gray fibers
Chrysotile asbestos, with its curly fibers, is in the serpentine family of minerals. The other types of asbestos, which all have rod-like fibers, are known as amphiboles. Asbestos fiber masses tend to break easily into a dust composed of tiny particles that can float in the air and stick to clothes. The fibers may be easily inhaled or swallowed and can cause serious health problems.

How is asbestos used?

Asbestos was mined and used commercially in North America beginning in the late 1800s. Its use increased greatly during World War II. Since then, it has been used in many industries. For example, the building and construction industry has used it for strengthening cement and plastics as well as for insulation, fireproofing, and sound absorption. The shipbuilding industry has used asbestos to insulate boilers, steam pipes, and hot water pipes. The automotive industry uses asbestos in vehicle brake shoes and clutch pads. More than 5,000 products contain or have contained asbestos. Some of them are listed below:

Asbestos cement sheet and pipe products used for water supply and sewage piping, roofing and siding, casings for electrical wires, fire protection material, electrical switchboards and components, and residential and industrial building materials
Friction products, such as clutch facings, brake linings for automobiles, gaskets, and industrial friction materials
Products containing asbestos paper, such as table pads and heat-protective mats, heat and electrical wire insulation, industrial filters for beverages, and underlying material for sheet flooring
Asbestos textile products, such as packing components, roofing materials, and heat- and fire-resistant fabrics (including blankets and curtains)
Other products, including ceiling and floor tile; gaskets and packings; paints, coatings, and adhesives; caulking and patching tape; artificial ashes and embers for use in gas-fired fireplaces; plastics; vermiculite-containing consumer garden products; and some talc-containing crayons

In the late 1970s, the U.S. Consumer Product Safety Commission (CPSC) banned the use of asbestos in wallboard patching compounds and gas fireplaces because the asbestos fibers in these products could be released into the environment during use. Additionally, asbestos was voluntarily withdrawn by manufacturers of electric hair dryers. In 1989, the U.S. Environmental Protection Agency (EPA) banned all new uses of asbestos; uses established prior to 1989 are still allowed. The EPA has established regulations that require school systems to inspect for damaged asbestos and to eliminate or reduce the exposure to occupants by removing the asbestos or encasing it. In June 2000, the CPSC concluded that the risk of children’s exposure to asbestos fibers in crayons was extremely low. However, the U.S. manufacturers of these crayons agreed to reformulate their products within a year. In August 2000, the EPA recommended that consumers reduce possible asbestos exposure from vermiculite-containing garden products by limiting the amount of dust produced during use. The EPA suggested that consumers use vermiculite outdoors or in a well-ventilated area; keep vermiculite damp while using it; avoid bringing dust from vermiculite use into the home on clothing; and use premixed potting soil, which is less likely to generate dust.

The regulations described above and other actions, coupled with widespread public concern about the hazards of asbestos, have resulted in a significant annual decline in U.S. use of asbestos: Domestic consumption of asbestos amounted to about 719,000 metric tons in 1973, but it had dropped to about 9,000 metric tons by 2002. Asbestos is currently used most frequently in gaskets and in roofing and friction products.

How can asbestos be identified?

While it is often possible to “suspect” that a material or product is/or contains asbestos by visual determination, actual determinations can only be made by instrumental analysis. Until a product is tested, it is best to assume that the product contains asbestos, unless the label, or the manufacturer verifies that it does not.

The EPA requires that the asbestos content of suspect materials be determined by collecting bulk samples and analyzing them by polarized light microscopy (PLM). The PLM technique determines both the percent and type of asbestos in the bulk material. EPA Regional Offices can provide information about laboratories that test for asbestos.

Your Trusted Partner in Asbestos Abatement and Testing Solutions

Frequently Asked Questions

This website uses cookies.